Products
Products
MM32SPIN080G
- Overview
- Document
- Tools & Software
- Target Application
- Selection
- Product Information
Product Description
MM32SPIN080G is a high-performance single motor control SOC product in the MM32SPIN family, utilizing Cortex-M0 core and integrating a 200V three-phase N-channel gate driver.
- 32KB Flash, 4KB SRAM, maximum clock frequency of 60MHz
- 7 timer resources: 1 16-bit advanced timer, 1 32-bit general-purpose timer, 3 basic timers, 1 12-bit IWDG, 1 24-bit Systick
- Supports 2-channel DMA
- Hardware divider HW-Div
- 1 channel 12-bit analog-to-digital converter (ADC), supporting 11 channels, with a sampling rate of 1Msps
- 2 channels of analog comparators (COMP) and 2 channels of rail-to-rail operational amplifiers (OPAMP)
- Three-phase N-channel gate driver
- Supports UART/SPI communication
- LDO operating voltage range: 5.5-18V
- Built-in DC/DC supports voltage up to 100V
- Operating temperature range: -40℃ to 105℃
- Available in QFN48 and QFN32 4x4 packages
Suitable for a wide range of applications:
- Garden tools
- High-pressure server fan
- Motor control
Product Features
Related Videos
- No Details
Data Sheet
MM32SPIN080G Datasheet (Chinese)
Chinese0.2PDF2.71MB2024.07.01Description: Supports MM32SPIN080G series, provide detailed specifications, pin definition, electrical characteristics and packaging information.
Application Note
AN0001 MDK5.18 Installation Guide (Chinese)
Chinese1.3PDF337.74KB2023.08.18Description: MDK5.18 installation guide, a brief introduction to the establishment of a MM32 chip project.
AN0005 setting the chip to factory (Chinese)
Chinese1.4ZIP175.64KB2023.08.18Description: MM32 series chip restore the factory settings
AN0006 programmer supported by third party (Chinese)
Chinese2.4PDF2023.09.26Description: Third-party tools for programming MM32 products
AN0006 programmer supported by third party (English)
English2.4PDF2023.09.26Description: Third-party tools for programming MM32 products
AN0012 Installation of MM32 Series Keil pack (Chinese)
Chinese1.0PDF745.44KB2023.08.18Description: MM32 Series Keil pack installation method
AN0016 Use J-Flash to program the MM32 (Chinese)
Chinese1.0PDF1.69MB2023.08.18Description: Brief for Using J-Flash to program MM32 chip
AN6405 MM32SPIN First step
Chinese1.0ZIP1.51MB2023.08.18Description: MM32SPIN First step
AN6301_Sensorless Trapezoidal Control of BLDCM (Chinese)
Chinese1.0PDF1.76MB2023.08.18Description: Sensorless Trapezoidal Control of BLDCM
AN6303 PMSM control principle (Chinese)
Chinese1.0PDF813.50KB2023.08.18Description: PMSM control principle Introducion
Lib Samples
SPIN Series PCB&SCH library for Altium
English1.11ZIP63.66KB2024.09.09Description: SPIN Series PCB&SCH library for Altium
MM32SPIN080G Lib Samples
English1.3.6ZIP3.19MB2024.08.22Description: MM32SPIN080G series, which integrates MM32SPIN0230 series. This link will redirect to the MM32SPIN0230 Lib Samples.
Recommended Tools
Motor-DK (MM32SPIN080G)
VDC input: 5.5V~100V
MCU built-in 220V 6N pre-driver and two OPAs
250V/16A NMOS on-board
Support chip built-in HV-buck & 5.0V LDO(60mA)
Support HALL(capture) and BEMF detect switching
Support OCP detect using Built-in comparator
Support motor speed control using potentiometer & PWM
Support UART(multiplex with SWD)/KEY/LED
MM32-LINK MINI Emulator
Support MM32 MCU SWD programming and debugging, compatible with CMSIS-DAP debugging channel
Support CDC virtual serial port, baud rate support 9600 / 14400 / 19200 / 28800 / 38400 / 56000 / 57600 / 115200 etc
Support firmware update and function configuration via U-Disk
Driver-free installation, supports Windows and Linux operating systems
Recommended Software
IAR Pack
When using IAR integrated development environment to develop MM32 microcontroller, you need to install this support package, so that you can select MM32 chip model, debug and download in IAR.KEIL Pack
When using KEIL integrated development environment to develop MM32 microcontroller, you need to install this support package, so that you can select MM32 chip model, debug and download in KEIL.J-Link Pack
When using J-Link windowto debug MM32 microcontroller or using J-Flash to make programming, this supportpackage needs to be installed to realize the selection of MM32 device in J-Flash; When J-Li...
Target Application
- No Details
Selection
Buy
Part No.
Core
Max Speed (MHz)
Flash (KB)
RAM (KB)
Backup RAM(KB)
Ext. Bus I/F
I/O#
Security
32bit DIV
Advanced TMR
GP TMR
LP TMR
WDG
RTC
U(S)ART
LPUART
I²C
I³C
SPI
I²S
USB 2.0 FS
USB 2.0 HS
CAN 2.0B
Ethernet
SDIO
QSPI
ADC (1Msps, 12bit)
ADC (3Msps, 12bit)
DAC (12bit)
ACMP
OpAmp
Segment LCD
Pin Counts
Package
Package Size
Operation Temp
- 樣片請求Agent Channel Link
- MM32SPIN080G
- M0
- 60
- 32
- 4
- -
- -
- 20
- -
- 1
- 1
- 4
- -
- 1
- -
- 1
- -
- -
- -
- 1
- -
- -
- -
- -
- -
- -
- -
- 11ch
- -
- -
- 2
- 2
- -
- 48
- QFN
- 6X6
- -40~105C
- 樣片請求浙江省建材集团有限公司Agent Channel Link
- MM32SPIN080GN
- M0
- 60
- 32
- 4
- -
- -
- 11
- -
- 1
- 1
- 4
- -
- 1
- -
- 1
- -
- -
- -
- 1
- -
- -
- -
- -
- -
- -
- -
- 7ch
- -
- -
- 2
- 2
- -
- 32
- QFN
- 4X4
- -40~105C
You have not logged in yet, please log in and apply again, thank you!
Sample Application
We offer the following online ordering options
MM32F0010
Home > 産品 > MM32F > MM32F Value Line >MM32F0010
- Dealer
- Stock*
- Unit Price
- Quantity
- 1548
- $5.25
- 50
- Americas (inventory)
- EMEA(inventory)
- Asia(inventory)
- Japan(inventory)
- Dealer
- Stock*
- 1548
- Order Now
- 1548
- Order Now
- 1548
- Order Now
- 1548
- Order Now